How to control material effects using opacity

The white layer plays a big part in how your material effects turn out. From adjusting opacity to knowing when to let the material show through, I’ll walk you through the dos and don’ts, what to keep in mind, and everything in between.

15 Nov 2026

TL;DR:

What is white layer opacity?
A white layer printed at less than 100%, so some of the material effect still shows through. 0% white gives you the full effect, 100% white blocks it completely.

Which white layer percentage should I use?
Lower percentages let more of the material through, higher ones give you more solid colour. As a rough guide, 10–20% gives a subtle shimmer and 50–60% a mostly colour-focused look.

Does 30% white look the same on every material?
No. 30% on glitter won't look like 30% on holographic, so it's worth checking the colour charts in our sample pack before you decide.

How do I order a white layer with opacity?
Set it up in your file, or just leave a comment with your order, like "100% white behind the logo, 50% behind the background". Our team checks your file before it's printed.

First, a quick white layer recap

A white layer is printed underneath your design, and its job is to block the material. Where there's no white layer, the material effect shows in full. Where there's 100% white, the material is completely hidden and your colours print solid and clean.

Most people stop there, at either 0% or 100% (fair enough, it's the easy choice). But a white layer can also have opacity, and that's where it gets fun. If you want the full rundown first, luckily we have a whole article on white layers.

Three colourful, illustrated keychains: "Spring Fling" with flowers, "Señorita" with a skull, and "Mystical Tiger" with bold text.

Different materials, different reactions

Here's the part that makes it interesting. The percentage is the same number on every material, but the result depends completely on what's underneath. 30% on glitter won't look like 30% on holographic, and transparent behaves differently from both.

That's why it pays off to plan before you order. The colour charts in our sample pack show the standard opacities printed on the actual material, so you can see the difference with your own eyes instead of guessing. And if you're still unsure, just ask us.

Fanned-out CMYK colour charts printed on different sticker materials, including holographic

Think of it as a dimmer switch

Opacity works pretty much like a dimmer switch for the material underneath. There are three settings to know:

  • 0% white, full effect: no white layer at all, so you get maximum glitter, holo shine or transparency.

  • 100% white, no effect: the material is fully blocked and your colours look solid.

  • Anything in between, controlled effect: the material still shows, just softer.

And roughly how the in-between steps behave:

  • 10–20% white gives a subtle shimmer or light texture

  • 30–40% white gives a visible effect, but more balanced

  • 50–60% white is mostly about the colour, with a little depth behind it

  • 70% and up leaves very little of the material

Same sticker, four white layers

Here's the same Pixie Dust sticker printed four times. Only the white layer under the pink letters changes, and the border has 100% white on all of them.

Hand holding a Pixie Dust sticker with Japanese text with full-colour print, against a white background

0% white

Full Pixie Dust sparkle in the pink letters, bright and packed with texture.

Hand holding a Pixie Dust sticker with Japanese text with 15 percent white layer, against a white background

15% white

Still very sparkly. Hard to tell apart from 30% in photos, but in person you see more of the material.

Hand holding a Pixie Dust sticker with Japanese text with 30 percent white layer, against a white background

30% white

Softer and a bit more solid, but still shimmering. On light designs, it almost looks like snow glitter.

Hand holding a Pixie Dust sticker with Japanese text with 100 percent white layer, against a white background

100% white

The material is fully blocked, so the letters print as solid colour without any sparkle.

Not sure how to set it up? No worries!

You can set up a white layer with opacity in your own file, and our support page on how to create white layers walks you through it step by step.

And if you'd rather skip the technical part, that's totally fine. Leave a comment when you place your order and tell us:

  • where you want the material effect

  • where you want it blocked

  • how strong the effect should be, for example "100% white behind the logo, 50% behind the background"

Our team checks your file before it goes to print, so nothing gets lost along the way.

Image showing a sticker in the editor-mode and printed, with instructions from the customer on how to place the effects, on a grey and black background.

Final thoughts

Opacity is all about control. Once you know how different percentages change the material underneath, you stop guessing and start designing on purpose, and that's often what separates a busy sticker from one that feels deliberate.

If you ask me, the best way to learn is to try it. Pick a special material, decide where the effect should lead and let the white layer handle the rest. Your future self (and your stickers) will probably thank you.


Author
Emma
Continue